| Sun Fire 6800- Information Page |
| Where to Buy | |
Best Price |
|
New In Box (NIB) |
220R
280R
420R
A1000
A5000
A5200
Blade 100
Blade 150
Blade 1000
Blade 1500
Blade 2000
Blade 2500
B1600
D1000
D130
E10K
E250
E2900
E3500
E450
E4500
E4900
E5500
E6500
E6900
IBM Home Page
SAN - Fiber Channel
SF12K
SF15K
SF3800
SF4800
SF6800
Sun Home Page
T105
T1000
T2000
Ultra 25
Ultra 45
Ultra 5
Ultra 10
Ultra 60
Ultra 80
V100
V120
V125
V215
V245
V445
V1280
V210
V240
V250
V440
V480
V490
V60X
V65X
V880
V890
Sun Fire[tm] 6800
Sun Fire 6800
Processors | Main Memory | Standard Interfaces | Internal Mass Storage | Power Supplies
Environment | Regulations | Dimensions and Weight | Clearance and Service Access
| Processors top |
Number: Two to 24 Architecture: - UltraSPARC[tm] III: 750MHz CPU Interface: Packet-switch crossbar connecting up to 6 CPU/Memory boards, and up to 4 I/O assemblies System Interconnect: Fireplane, 9.6 GB/sec (at 150 MHz) 501-4405 - Sun Fire 6800 6-Slot System Centerplane |
| System Boards top |
Number of Boards: Maximum of 6 CPU/Memory boards and 4 I/O assemblies CPU/Memory Board: Two CPU's with 16 GB (max) Memory or four CPU's with 32 GB (max) memory SF-XCPUBD-227 - Sun Fire CPU / Memory board with 2 x 750MHz CPU & 2GB memory (2 x X7053A) |
| Main Memory top |
32 GB memory (max) per 4 CPU's or 16 GB memory (max) per 2 CPU's on a CPU/Memory board Maximum system memory capacity of 192 GB (6 × 32 GB) 1GB DIMMs are not supported on 750MHz CPU/Memory boards. Note: The UltraSPARC III processor contains an integrated memory controller which is responsible for memory management of local memory and for running diagnostics on the CPU/Memory board. Therefore, memory capacity is directly related to the number of CPU's. X7051A - 2GB Memory kit (4 x 512MB SDRAM DIMMs) X7056A - 4GB Memory kit (4 x 1GB SDRAM DIMMs) |
| Standard Interfaces top |
Responsible for the overall control of the system. Each System Controller includes one RS-232/423 (DB25) serial interface and one 10/100BASE-T ethernet/fast ethernet (RJ45) interface. Dual system controllers are standard on the Sun Fire 6800. 501-5407 - Sun Fire 6800 System controller |
| Internal Mass Storage top |
A 2U-high, rack-mounted unit into which two UltraWide SCSI3 disk drive, and one DVD drive and one DDS4 tape drive can be fitted. The DVD and DDS4 devices can be replaced by extra disk drives if required. Up to 3 - D240 trays can be installed into the Sun Fire 6800 cabinet. SG-XMT1-H2D1T1 - Sun Microsystems StorEdge D240 is a 2U Rack Mount unit with redundant power supplies |
| Power Supplies top |
The Sun Fire 3800-6800 server family can be configured with N"4" redundant DC bulk power supplies, which are hot swappable. The DC bulk power supplies provide power for all of the Sun Fire 3800-6800 systems' internal requirements, on a load-shared 48VDC power bus. The base package comes with 6 power supplies. |
| Environment top |
AC Power : 200 - 240 VAC, 47 - 63 Hz, 34 A with 2 RTS Input Power: 6,460 W Heat Output: 22,030 BTU/hr Temperature : Optimal: 21° C to 23° C (70° F to 73.5° F) Acoustic Noise: 69 dB(A) Vibration: Operating: 0.15 G, 5 to 500Hz, swept sine Shock: Operating: 3 G, 11 ms, half sine Plug Type-U.S. : NEMA L6-30P, 200 - 240 VAC Plug Type International : 32 A, IEC309, 200 - 240 VAC Number of Cords: 2 or 4 (dual power grid feature) |
| Regulations(Meets or exceeds the following requirements) top |
Safety : UL 1950, CSA C22.2 950, TUB EN60950, CB Scheme (Worldwide Deviation) RFI/EMI: FCC Class A, ICES 003 Class A, DOC Class A, EN55022 Class A, VCCI Class A, BSMI Class A, EN61000-3-2 & EN61000-3-3 Immunity: EN55024, EN50082-1
|
| Dimensions and Weights top |
Height : 75.00 in, 190.5 cm Width: 24.00 in, 61.0 cm Depth: 53.00 in, 134.6 cm Weight(main Cabinet): 1000 lbs, 454 kg Power Cord: 180 in (15 ft), 457.2 cm (4.6 m) |
| Clearance and Service Access top |
Front: 4 ft (122 cm) Rear: 3 ft (91.4 cm) Right: 0 clearance during operation Left: 0 clearance during operation |
Where to buy:
IBM Parts : Sun Parts : Cisco Parts : SAN - Fiber Channel HBA's